Skip to content

Find a MeshCore community

Type a community or province to filter the list, or look up your city to find the closest communities.

Community information can change

This information could be out of date!

25 listings 23 listed active 2 listed forming 1 with different local settings
Showing 25 communities

Communities

Alberta MeshCore Networks

Active

Alberta

Building Alberta's community-operated off-grid LoRa mesh network

Province: Alberta

Settings: Uses the Canada defaults

Listing reviewed: 2026-08-29

View listing details

Canada defaults

Use these settings unless your local community lists different ones.

Setting Canada default
Radio preset Canada
Raw radio values 910.525 MHz / 62.5 kHz / SF7 / CR5
Path hash mode 3-byte
Command-line path setting set path.hash.mode 2

The MeshCore app now has separate Canada and USA presets. Both use the radio values above, but Canada also selects 3-byte paths. USA leaves the path-hash setting unchanged. You can still change that setting manually. See the September 9 preset update.

If your app or flasher still shows USA/Canada (Recommended), use it for the same radio values and set 3-byte paths separately. Update repeaters older than firmware 1.14 before relying on multi-byte paths; those older versions cannot forward them.

Check local settings first

Nearby devices need matching settings. A card marked Different local settings takes precedence over the Canada defaults after you confirm it with the listed community.

Browse by province or territory

Add or update a listing

Found missing or outdated information? Send a community update. No GitHub account needed.